Best dating winchester model 70 270 wsm accuracy loads

best dating winchester model 70 270 wsm accuracy loads

The CRPFS is basically the Post-1964 Winchester Model 70 action with the lower portion of its bolt face ground flat. This allows the extractor to slide over the cartridge rim without having to skip over it. In theory, you have the advantages of a secure CRFS extractor while being able to single-load like a PRFS gun. Next question: “Why should I give a damn?” If you’re the average Joe Schmoe hunter, you shouldn’t. It basically doesn’t affect accuracy or the gun’s performance I own a Winchester Model 70 .270 Winchester, and I bought it for $400 with a VX-II Leupold 3x9x40 (I bought the rifle for the scope price alone!!!). I went to check the zero on it, and I could not zero it Would someone be so kind to let me know the exact production date…. Thank you so much for your time son. Reply.

best dating winchester model 70 270 wsm accuracy loads

Winchester Model 70 rifles (Win. Model 70) Winchester's Model 70: The Rifleman's Rifle By Chuck Hawks Win. Model 70 Super Grade. Illustration courtesy of U.S. Repeating Arms Co., Inc. The Winchester Model 70 is one of the best known rifles in the world. It is probably equaled only by the Mauser 98 as a revered icon among bolt action rifles. The Model 70's immediate predecessor was the Model 54.

The Model 54 was produced from 1925-1936. But the M-54 had some drawbacks, chief among them a bolt, safety, and stock not designed for use with telescopic sights. Early Model 54's had no gas escape port, although this was corrected in later production. So in 1936 Winchester introduced a similar but revised and improved rifle, the famous Model 70. The Model 70 corrected the faults of the Model 54 and was produced from 1936 to 1963 with only relatively minor changes.

During this time the Model 70 became a legend in its own time, the favorite hunting rifle of a plethora of knowledgeable sportsmen and gun writers of the era who sang its praises. The Model 70 also became the favorite American action on which to base a fine custom sporter. The pre-1964 Model 70 is now a collector's rifle, particularly in scarce calibers, and specimens in excellent or better original condition bring high prices on the used market.

Between 1936 and 1963 the Model 70 was built in a number of variations and calibers. Not all calibers were available in every variant. Models included the Standard Grade, "Carbine" (not an official designation, but a short 20" barreled Standard version produced between 1936-1946), Featherweight, Super Grade, Super Grade Featherweight, Super Grade African, National Match, Target, Bull Gun, Varmint, and Alaskan.

Calibers included .22 Hornet, .220 Swift, .243 Winchester, .250 Savage, .257 Roberts, .264 Winchester Magnum, .270 Winchester, 7x57 Mauser, .300 Savage, .308 Winchester, .30-06 Springfield, .300 H&H Magnum, .300 Winchester Magnum, .338 Winchester Magnum, .35 Remington, .358 Winchester, .375 H&H Magnum, and .458 Winchester Magnum. A few Model 70 were produced to special order in 7.65mm Argentine and 9mm Mauser, based on left over Model 54 barrels.

These are very rare, and along with specimens in .250 Savage, 7x57, .300 Savage, and .35 Remington command premium prices. The more recent .358 Winchester, available only in the Featherweight model, is also a rare caliber.

Pre-1964 Model 70's usually had 24"-26" barrels and were equipped with open sights. The action has a flat bottom, two front locking lugs, an excellent single stage adjustable trigger, a full length Mauser-type extractor, fixed ejector, and a steel trigger guard and hinged magazine floor plate assembly (aluminum in Featherweight models).

The breech was coned for smooth and reliable feeding and enclosed the cartridge head to the extractor groove. The Magazine capacity was 5 rounds for standard calibers, 4 rounds for .300 and .375 H&H, and 3 rounds for Winchester Magnum calibers.

Checkered walnut pistol grip stocks were universal. Standard rifles weighed about 8 pounds. Post WW II production was usually drilled and tapped for scope mounts. I have read that production of Pre-1964 Model 70's stopped at serial number 581,471. Super Grades usually have jeweled bolts, fancy grade walnut stocks with a raised cheekpiece, deluxe wrap around checkering, black forearm tips and black pistol grip caps.

"Super Grade" is marked on the floorplate. For all of its vaunted reputation, the pre-1964 Model 70 was not perfect. The Standard Grade rifle came with a 24" medium contour barrel in standard calibers like .270 and .30-06 and had a substantial stock.

Add a scope and mount and it usually weighed in at around 9 pounds, empty. Of course, the weight minimized recoil while the long and relatively stiff barrel got full velocity from its cartridges and had a fine reputation for accuracy, but shooters began to think it was too heavy. Also, more modern rifles like the Weatherby Mark V and Remington 721, 725, 700 series fully enclosed the cartridge head and were therefore stronger.

From Winchester's point of view its biggest flaw was that it was relatively expensive to mass produce given the technology of the time. In 1964 a revised Model 70 was introduced. This new Model 70 retained some of the good features of the pre-1964 Model 70, but was in fact a new action.

It was a stronger and more modern action that was more economical to produce. The pre-1964 Model 70, like all Winchester rifles designed prior to WW II, required a lot of hand labor. The new Model 70 introduced labor saving innovations intended to keep it competitive in price with Remington and Savage bolt action rifles.

To put it mildly, the new rifle was not an immediate success. Some of the Model 70's biggest fans were bitter about the changes, and castigated the new model in print. Jack O'Connor, who had helped popularize the pre-1964 Model 70, put it this way in his The Rifle Book: "Sometime in the very early 1960's I was informed by Winchester brass that the Model 70 was being redesigned. I told them I was glad to get the information so I could lay in four or five more before they loused the rifle up." "Then I saw the pilot model of the 'New Model 70.' At the first glimpse I like to fell into a swoon.

The action was simplified, the trigger guard and floor plate made of a flimsy-looking one-piece stamping. The stock had stodgy lines and no checkering, and the barrel channel was routed out so much a herd of cockroaches could hold a ball below the barrel. On my first glimpse of the 'New Model 70' I was surrounded by the designers and by Winchester brass. I told them the creation would not sell, that it was one of the ugliest rifles I had ever seen." Before the new Model 70 was introduced to the public, Winchester took some of this criticism to heart and substituted the aluminum trigger guard and magazine floor plate assembly from the previous Model 70 Featherweight.

They impressed a moderate amount of (reverse) checkering into the stock, and cleaned up its lines somewhat (but not enough).

The soaring barrel remained, as Winchester was committed to using a free floating barrel on the new Model 70 and had over estimated the gap required. The new Model 70 abandoned the full length extractor and fixed ejector of its predecessor in favor of a smaller claw extractor and a plunger ejector in the bolt face (similar to the Weatherby Mark V). Thus it became a "push feed" rather than a "controlled feed" action.

There were never any feeding or ejection problems with the new Model 70, but Winchester was roundly criticized for abandoning controlled feed. The case head was completely enclosed in the new action, which was stronger than its predecessor. The much copied three-position safety was retained, as was the adjustable trigger. The machined, flat bottomed action had a large, integral recoil lug. In the event of a ruptured case it handled escaping gas well. The polishing and bluing remained good, the bolt was jeweled, and the stock had a high gloss finish.

However, the new action's good points were overlooked and, as Jack O'Connor had predicted, the new Model 70 did not sell very well.

Within just a few years the stock was slimmed some more, the barrel channel gap was reduced, and the impressed checkering diamonds became positive. About 1972 the Standard Model 70 rifle, particularly the stock design, was again revised. The pistol grip stock was entirely redesigned, becoming slimmer and more shapely with a restrained Monte Carlo comb and sculpted cheekpiece. It was decorated with a generous amount of well executed cut checkering in a traditional Model 70 pattern and a black forearm tip and steel pistol grip cap, which were set off by white line spacers.

The durable satin stock finish looked great, and detachable sling swivels were included. Jack O'Connor was an honest man, and he freely praised the newly revised version of the Model 70 in print, announcing that the Model 70 was back. I had the temerity to telephone the great man (who didn't know me from Adam) to discuss the revised Model 70 with him, and he politely answered my questions and shared with me some of his vast experience.

Unfortunately, many of his fellow gun writers of lesser stature were unwilling to revise the anti-new Model 70 position to which they had publicly committed themselves. The revised Model 70 Standard rifle looked much like the current (circa 2002) Super Grade, but of course it came stocked in standard grade walnut. I regarded it as the best looking mass-produced rifle of its time, and I still do.

Never the less, Model 70 sales continued to lag behind the Remington Model 700, which had become the top selling bolt action rifle in the U.S., even though it incorporated more cost reducing measures in its design than the new Model 70. Winchester had committed the unpardonable sin of tampering with a legend, and few shooters were willing to cut them any slack. In 1974 I purchased a new Model 70 Standard rifle in .270 Winchester caliber.

It came with a medium weight 22" barrel, adjustable iron sights, and a jeweled bolt with a knurled bolt handle. It measured 42.5" overall with a 13.5" length of pull, and weighed 7.5 pounds. The metal finish was a well-polished deep luster blue. I mounted a Weaver K4 (4x) scope in Weaver mounts and rings. About that time I ran across a late pre-1964 vintage Model 70 in like new condition, and I was surprised to find that my revised new Model 70 was a much more handsome rifle in every way, not to mention stronger and more accurate.

The standards had changed without my realizing it, and the legendary pre-1964 Model 70 looked dated and plain. At the range I found that the new Model 70 would average three shot groups of about 1.5" at 100 yards with 130 grain Hornady factory loads (which this rifle favored) or my equivalent handloads using the same 130 grain Hornady Spire Point bullet.

Occasionally I would do everything just right and a group of around 1" would be the result. I never had any sort of malfunction with the Model 70, and at the range you could feed a cartridge directly into the chamber and close the bolt (which is not possible with most controlled feed rifles). In 1992 Winchester again revised the Model 70 action, this time restoring the full length extractor, receiver mounted ejector, coned breech, and controlled round feed (CRF) while retaining the other good features of the push feed Model 70 action.

The new, revised action became the heart of the Classic models, available in many variations, which now constitute the bulk of the Model 70 line.

There are super-short, short and standard length Model 70 Classic actions. The Classic controlled feed Model 70 action was designed from the outset for a hunting rifle, not adapted from a military or target rifle. Its coned breech ensures smooth and reliable feeding, the full length Mauser style extractor grabs a big slice of the rim of the case, and the fixed blade-type ejector allows reloaders to remove their brass by hand if they so desire.

The flat bottomed action is partly glass bedded and the integral recoil lug is substantial. With the bolt back the opening is large and thus the action is easy to reload rapidly.

The Model 70's 3-position safety is highly regarded by most users and has been widely copied. The Model 70 Classic action is perhaps the finest Mauser pattern, two front locking lug, bolt action ever mass produced for a hunting rifle.

It offers just about everything the aficionado of such actions could want, including strength, accuracy, and exceptional feed reliability. It is the odds-on choice among bolt actions for ultra-critical hunting applications such as rifles for hunting dangerous game. But the push feed action is still available (2003) in three somewhat less expensive models.

These are called the Coyote (a bean-field type rifle with a brown laminated stock), Stealth (Kevlar/fiberglass stock), and Black Shadow (composite stock). In 2003 Winchester announced a new super-short Model 70 action designed for the equally new WSSM cartridges.

This new action is approximately .5" shorter than the previous short Model 70 action and is offered in Coyote, Super Shadow, and Featherweight models. The Featherweight and Super Shadow versions come with 22" barrels and weigh about 6 pounds. The Coyote weighs 9 pounds and is supplied with a 24" barrel in all calibers. The Super Shadow and Coyote models in WSSM and WSM calibers now feature a new "controlled round push feed" (CRPF) action.

This action variation uses the extractor of the push feed rifle in a modified bolt face that no longer completely surrounds the case head, and the fixed ejector of the Classic model. This change was apparently required to get any sort of adequate feed reliability from the stubby WSSM cartridges, and is also being used for the WSM cartridges (which have their own feeding issues).

The supposition is that this new CRPF action will eventually replace the old push feed action in the Model 70 line. The new CRPF Super Shadow and CRF Ultimate Shadow models features a composite stock with rubberized grip surfaces and an energy absorbing butt pad.

Rather than checkering the rubberized grip surfaces incorporate large, oval-dots in two sizes, rather like a rubber shower mat. There are swoopy lines molded into the plastic stock to accent the contour of the cheekpiece and forearm. These are certainly the most bizarre looking Model 70's ever introduced, and make the much maligned 1964 version look quite restrained by comparison!

In 2003 Model 70 Classic controlled feed models include the Featherweight (named the "Bolt Action Rifle of the Century," with some justification), Super Grade, Safari Express (the former African), Compact (a "mountain rifle"), Sporter LT (the former Standard), Laminated, Stainless (Composite), and three variations of the new Ultimate Shadow.

There are left handed versions of the Sporter LT and Featherweight. The Stainless and Ultimate Shadow versions come with synthetic stocks, the Laminated comes with (guess what) a brown laminated wood stock, and the rest come with walnut stocks. Model 70's are made in a wide range of calibers from .223 Remington to .458 Winchester Magnum, although not all calibers are available in all models.

Olin/Winchester never really recovered from the negative reaction to the changes of 1964, and in 1981 Olin sold the rights to manufacture Winchester firearms to the newly created U.S.

Repeating Arms Company. U.S. Repeating Arms made every effort to remain true to the Winchester heritage, and the Classic controlled feed Model 70 rifles are evidence of that. After that the corporate history becomes a bit confusing, at least to me, as I am no businessman. From what I can gather, Winchester Repeating Arms was acquired by the Belgian Herstal Group (Browning/FN) in 1990.

In 1992 the French company GIAT purchased the Herstal Group and in 1997 the Herstal Group was purchased by the Walloon region of Belgium (where the FN factory is located in the town of Herstal). The corporate offices of both Browning and Winchester are now located in Morgan, Utah in the U.S.A. Unfortunately, in March 2006 the Winchester plant in New Haven, CT was closed as unprofitable.

This brought production of Model 70 (and Model 94) rifles to an end, at least temporarily. However, in 2008 it was announced that production of the Model 70 would resumed in the FN/Browning factory complex in Columbia, South Carolina, in a dedicated Winchester portion of that facility. New Model 70's finally became available to consumers in mid-2009. These are made to the ISO 9001 standard of quality. The classic Model 70 controlled feed action is retained, the only significant change being the replacement of the very good original Model 70 trigger with the new and even better MOA trigger.

These new Model 70's are built to the highest standards of precision and accuracy ever in the history of the Model 70. Through all the changes, the Winchester Model 70 has remained a top quality firearm and an international legend. It still deserves the title, "The Rifleman's Rifle." Note: Complete reviews of the Model 70 Lightweight Carbine, Classic Featherweight, new (produced in SC) Super Grade and Jack O'Connor Tribute Rifle may be found on the page.


best dating winchester model 70 270 wsm accuracy loads

best dating winchester model 70 270 wsm accuracy loads - winchester 70 270wsm


best dating winchester model 70 270 wsm accuracy loads

Like a fine wine or , some things just get better with age. Others, however, age with the gracefulness of . With the assistance of Browning and FNH, the Winchester Model 70 has matured and grown into an excellent weapon platform for the nostalgic sportsman who doesn’t want to sacrifice functionality . . . On rare occasions, being a resident of the Southeastern United States allows me to come into contact with purveyors of fine firearms (read: fellow hoplophiles). On one encounter I met a gentleman who owned an older 1927 Winchester Model 70 and figured it would be a hell of a thing to compare a Model 70 made in the ’20s to a current production rifle.

I’m no engineer, so I decided to forego delving into the technical aspects of the rifles and instead focus on comparing their fit, finish, & feel. Fit Both the original and current Model 70s gets A+’s across the board. The crown on the older rifle is not as sharp but I doubt that has to do with inferior craftsmanship and more to do with decades of wear and tear.

Hell this gun was 60-some years old when I was still in diapers. Finish The furniture on the original Model 70 is a little nicer than the wood on current production models, but in all fairness, the original rifle had an aftermarket mani-pedi done by a local smith about 30 years ago.

Did I mention the local ‘smith also regularly did restoration work for the Smithsonian? If modern production Winnies came with that kind of attention to detail, they’d be triple their current MSRP.

Feel The original Model 70 has, of course fired (tens of?) thousands of rounds through it, so the action has had a 70-year trigger and action job done to an already hand-polished rifle.

It’s so smooth, the bolt may as well be resting in a teflon chamber dripping with Astroglide. The new model 70 is stronger but lighter by virtue of CNC machined superior steel.

That translates into more recoil, but the Model 70 isn’t a target gun, it’s a hunting rifle. Enough beating around the bush, though. It’s time to get to what many old-timers or bolt-gun enthusiasts are wanting to hear. “What the hell is controlled round push feed (CRPFS)?” It’s an amalgamation of a controlled round feed system (CRFS) and a push round feed system (PRFS). A CRFS gun’s extractor grabs the rim of the cartridge and “controls” it the entire way from the moment it leaves the magazine until it’s in the chamber of the rifle.

Whereas a PRFS gun’s extractor doesn’t grab the round’s rim until the bolt is fully closed on a chambered round. The pros and cons of each system can get mind-numbingly technical. All you really need to know is that you can’t easily single load or short stroke a CRFS gun. Now you’re probably thinking, “ How the hell can the rifle be both?” Technically it can’t. The CRPFS is basically the Post-1964 Winchester Model 70 action with the lower portion of its bolt face ground flat.

This allows the extractor to slide over the cartridge rim without having to skip over it. In theory, you have the advantages of a secure CRFS extractor while being able to single-load like a PRFS gun. Next question: “ Why should I give a damn?” If you’re the average Joe Schmoe hunter, you shouldn’t. It basically doesn’t affect accuracy or the gun’s performance. If you’re a purist or a bench-rest shooter, it matters because the original Winchester Model 70 action is a Mauser action complete with CRFS.

Some people may argue that the weapon’s inability to single-load rounds was the reason it wasn’t adopted for use in official military service. Nevertheless, this reviewer could find no mention among government documents verifying the veracity of that rumor. Sorry guys, I love ya, but I’m not going to submit a FOIA request when I’m already on enough NSA watch lists for posting on this site.

My guess would be that the enormous stacks of Springfield ‘03 rifles the military had on hand would have made deploying a whole new weapon system a tough sell to the penny-pinchers in D.C.

The Model 70 earned the title, “The Rifleman’s Rifle” back in its heyday but does it still deserve the moniker? Absolutely. I took this hard-hitting lightweight blaster to my local range and tested the accuracy of both a cold bore and hot barrel (after 50 rounds). The gun’s point of impact shifted by such a small degree I would be hard-pressed to blame it on anything other than user error. Some may argue that the .30-06 cartridge is too much power for such a lightweight rifle.

Those people have never hiked five miles with gear to a tree-stand. The recoil from the Winchester Model 70 can be punishing, but the rifle is designed for a hunter to hike with it all day and shoot sparingly.

Not to say that the gun won’t keep ticking after countless (internal) magazine dumps. It will. In fact your shoulder will quit long before the time-tested Mauser action of the Model 70 will give out.

The Model 70 meets and exceeds expectations as a hunting rifle. Sporting a pencil-profile light barrel, the Model 70’s groupings barely grew as the barrel’s temperature increased.

And boy did that barrel get hot. After 25 rounds the barrel was too hot to handle without gloves. I ran two types of ammo through the rifle: Winchester Super-X 180 grain Power-Point and Greek HXP military surplus 152 grain lead core FMJ.

Greek HXP Groupings Even with surplus ammo the Model 70 was still an effective lead delivery system. This might not be a huge deal to the average hunter who zeros his rifle once a year right before deer season and leaves the gun/optic to gather dust until the following one.

But for plinking it’s good to know that your shots are landing where they are supposed to. Winchester Super-X Groupings After blasting away merrily thoroughly testing the firearm I had the bright idea of seeing how the light rifle felt during some off-hand shooting.

I was impressed; the gun isn’t balanced like a fine over/under shotgun, but it points easily. I was able to blast bowling pins and plink my with boring regularity. (Thanks Salute Products!) The Winchester Model 70 is the quintessential deer rifle for the hunter with too much heavy gear. The Featherweight setup won’t do anything to soak up recoil, but you’ll be praising the weight of rifle when you carry that 10-pointer back to your truck.

Specifications: Barrel Length: 22″ Overall Length: 42.75″ Length of Pull: 13.75″ Weight: 7.0 lbs. MSRP: $879.99 Ratings (out of five stars): Style * * * * * The Model 70 rocks a classic sporter rifle stock with attractive finish, clean checkering, and beautifully jeweled bolt.

The only thing that would have made this any better looking would have bit a deep blue hand-rubbed finish. But that’s a personal preference. Ergonomics * * * * 1/2 The Model 70 offers a nice balance of functionality and aesthetics. The bolt knob and forearm feature aggressive yet handsome checkering.

If the Model 70 sported an adjustable comb and LOP it would be flawless. Reliability * * * * * It’s a bolt gun and didn’t experience a single failure in the 300-odd rounds I put through her during the evaluation. I didn’t even manage to short-stroke the rifle while trying to “rapid fire” while plinking. Absolutely perfect. Customizable * * * * 1/2 Mostly every conceivable accessory that exists for more popular bolt guns like the Remington 700 is available for the Model 70.

There are a few exception such as the Accuracy International AICS stock. That said, McMillan makes functionally identical furniture that will work with the Model 70. Basically the only limit is your wallet. Overall * * * * * I was completely taken aback by the Model 70’s performance and handling.

I had tried similar offerings from Remington, but they felt cheap and their actions weren’t nearly as smooth. If you’re looking for an easy-carrying, hard-hitting hunting rifle, you’d be hard-pressed to find one as handy as the Model 70. I bought one of the New Haven Model 70s in 243 WSSM and it does what I want in a rifle. Very accurate with a Vortex Crossfire 3X9X50 scope. It is the heat for coyotes using 55 grain, deer with 95 or 100 grain.

Now that Winchester has started making the ammo again, I bought enough to last me the rest of my life. I am only 80 years old and love to shoot a versatile caliber. Is that a 6 round group of 3 inches plus at 100 yards? That looks pretty big. My Win 70 .30-06 will group 5 rounds into about 1 1/2 inches with the ocasional 3 round group at 3/4 of an inch or less. I’m glad to see that the 70 retains a pretty decent amount of its classic charm. It’s tough to keep up with all of the pre-64 / post 64 / etc.

bolt faces. My understanding is that the new controlled feed with push feed is allegedly the best of both worlds. Regardless, it looks like they all still have substantial claws to grab that case rim. I normally shoot heavy milsurp rifles, so recoil really isn’t a problem and I have slip on recoil pads for extended sessions. As for recoil in a hunting rifle? It’s been many years since I hunted.

But I very rarely fired more than 2 shots at a given animal. Our hunting rifles were not used as plinkers and once we sighted them in they only got used during season. .22s were our practice rifles. We shot much more with our rimfires and our shotguns.

Knowing Squirrel, rabbit, duck, geese, pheasant, grouse, quail all were taken with the shotgun. Seasons and limits allowed much more use of shotguns than center fire rifles. Knowing what I know now if I was to resume center fire hunting I would buy the lightest rifle possible, probably a single shot like the TC, and put a decent scope on it and call it a done deal. Didn’t it break your heart to see what they did in the 70’s to such a well designed and executed rifle?

All they needed to do was raise their price a bit to keep up with inflation and then market their rifle as being a step up from the other stuff in the market, particularly the Rem 700.

But nope, they couldn’t do that. Had to follow Remington into the basement on quality and cost. That said, for an accuracy rifle, the post-68 M70’s are a useful receiver as a starting point. Forget everything but the action, bolt and trigger. You are probably the guy to ask this question: what are the comparisons between the M70, the Remington 700 and the Savage action/barrels? All fall into the same price ranges, the major price differentials being in the quality of the stocks–but I am sure there is more to it than that.

Care to write about it sometime? It would take a rather lengthy post to fully detail the differences between these actions. I’ll try to write something up, but I don’t have a Savage rifle kicking around the shop to take photos of for detail illustration just now. It’ll be some time before I can have something prepared. The biggest differences I’d say are that both Remington and Savage do their utmost to strip out every possible dime of COGS from the product.

One of the reasons why Winchester gave up the pre-64 action and level of finish was that their management thought that they couldn’t compete with the Remington 700 product, which uses all manner of tricks (many not seen or noticed by the gun buying public) to reduce COGS.

What Winchester’s management failed to realize is that the Remington 700 was such a cheap rifle, with cheap finish, a insufficient extractor and future trigger issues, wasn’t really in the same league as the pre-64 M70. The fit, finish, function, etc on the early 50’s M70’s was quite nice, and they should have marketed it as “the rifle for the discriminating rifleman” instead of trying to compete with a cheap rifle meant for people who only wanted something that went “bang.” People who are interested in making a serious study of bolt actions and their attributes, upsides and deficits should start by reading Stuart Otteson’s two-volume set, Bolt Action Rifle, Volume 1 & 2.

These are now out of print, but you can get them in CD-ROM form from either Brownells or MidwayUSA. • got ta say..the 1970’s model 70’s were a let down in terms of looks..pressed checkering(ugly),,but the ones I’ve owned over the years never failed the function properly, were accurate, didn’t cause any problems with the push feed action..after all knowbody complains about the Remington and savage push feeds…I’ve owned them all…and when my money I’ve spent on expensive hunting is on the line my 1980 pre-usra 30-06 featherweight(push-feed) 2×7 leupold is always my go to choice… Years ago I owned a Winchester 670 in 300win mag.

Very cheap looking with pressed checkering and all. The funny thing is, it would shoot 1/2 groups all day as long as I didn’t flinch. I think just for old times sake (45yrs later)), I going to buy a new Feather Weight in 22/250 to chase coyotes with…… • One of the attentions to detail for accuracy on a M-70 are the guard screws. The front should be tight, the rear snug “enough” but the middle screw should be just snug enough to keep it from backing out.

People who really tighten down the middle screw can alter the ability of the rifle to put down good groups. As far as I’m concerned, the pre-64 Winchester, especially those made in the early 50’s, are the best of the hunting bolt guns until you get into custom rifles.

Many custom rifles continue to be made on Win70 pre-64 actions to this day. I own a dozen model 70s. The new ones are very bit as good as the old ones. tI have a 1942, a couple of 1985s, the rest are pretty current. I was a friend of Jack O’Connor.

I have a JOC .270, a .257 Roberts, 30-06, the rest are .243. Several are Super Grades. The current rifles workmanship is exceptional. I have a pre-64 Model 70 in .30-06 that belonged to my father. It’s one of my most cherished possessions. He’s still around (in his late 80s) and although I don’t see him as much as I would like, I feel a special connection with him whenever I get it out of the safe.

And incidentally, it’s still a tack driver. Would love to have one. I sighted in a friend’s bosses gun for him before he headed out on a antelope hunt. 270Win with a cheap ass Simmons scope. Damn if the thing didn’t have one of the nicest triggers out the box I ever seen and it printed a sub 1″ group with Federal Premium ballistic tips. He took a pronghorn at about 150 yds after tracking him about five miles. Sweet gun. One nit to pick: The M70’s first production year (as I recall) was 1937.

I think you have a typo there with the “1927.” The M70 was preceded in the Winchester inventory by the Model 54, which had many of the same features, just not as attractively presented to the user. The Model 54 was basically a slicked-up 1903 Springfield, with the magazine cutoff removed, the safety changed and the receiver profile cleaned up a bit.

The cone breech, Mauser-style extractor and drop-bottom magazine features were retained. After 12 years of the M54, the M70 came out in ’37. The big changes were that the front screw was moved out of the recoil lug, the bottom profile of the receiver became flat, with very simple sides, and therefore very simple to inlet, the safety was changed to the horizontally-swinging safety we know today (and three position), as a result the bolt shroud contour could be made much more elegant and simple, the gas dump port was added (the hole on the right side of the front ring, used for dumping blowback gas from a punched primer or failure of the case), and one of the big reasons for the M70’s success (IMO) was that the removed the bolt stop function from the trigger group.

A new bolt stop mechanism was added on the left side of the receiver, which enabled Winchester to come up with the M70 trigger mechanism, which was easy to tune and slick up. The M70 trigger is very easy to stone and adjust to make it a very reliable, crisp single-stage trigger.

Some salient issues to notice between an older (especially pre-WWII) M70 and a new production M70: 1. The rear sight on the pre-64 M70’s were dovetailed into a feature on the barrel known either as the “wedding band” or “the egg.” Today’s M70’s barrel profiles are smooth from receiver face to muzzle. There was a screw on the bottom side of the wedding band, and sometimes accuracy could be changed by how tightly that screw was snugged down.

2. Old M70’s almost always came with iron sights. Scopes could be mounted, but most all 70’s I’ve seen prior to ’64 had iron sights from the factory. The Winchester custom shop could produce a rifle without them, however. Old M70’s had two screws on the left side of the action for the mounting of a rear peep sight. I don’t know if the new production M70’s retain the two pre-drilled/tapped screw holes on the left side of the receiver for Williams/Redfield/Lyman peeps.

I’d guess that with a slick barrel with no front sight that there’s no provision for peeps without taking it to a ‘smith for mounting a front sight as well. 3. The pre-war M70’s (and into 1947, as Winchester worked off pre-war inventory – up to about s/n 80,000, with some exceptions afterwards) had a rear tang with what was known as a “cloverleaf” outline.

I’d need to find a picture to make this clear to people. Winchester eliminated the cloverleaf tang because under hard recoil, it caused some stocks to split in the grip area. One of the reasons why the pre-64 M70’s command a premium is the woodwork. The barrel channel on the post-64 M70’s was large enough to get crap wedged in there.

They called them “free floating barrels – just like on the accuracy rifles!” Yea, well, when I float a barrel, you can fit a couple sheets of paper between the barrel and the stock.

On a post-64 M70, you can stuff a fat piece of cardboard in between the barrel and the wood. It looked ridiculous. Winchester also went from nice woodwork (nice checkering, such as you see above) to pressed checkering, covered with high-gloss, sprayed-on finish. It looked like congealed crap.

Custom stockmakers did a booming business in post-64 rifles. The rifles shot well, but their stocks looked like something out of an amateur’s hack shop, they were so bad.

The bottom metal on the post-64 M70’s went to an aluminum floor plate and trigger loop, and as I’ve said before: One of the requirements of a “nice gun” is that there be no aluminum on the gun – anywhere. Post-64’s had aluminum in the sights and bottom metal, and that, coupled with the crappy checkering filled with spray-on high-gloss finish, earned Winchester a boatload of wrath from the American gun buying public.

Today’s M70’s got rid of the crappy finish and they now used cut (albeit machine cut) checkering instead of the pressed-in checkering, and their finish is vastly improved. I have to say, however, that the modern barrel crown in the picture above is horrific, an aesthetic disaster. But that’s just me. Others might not object. I have inherited both a model 54,(my grandfathers) and pre-64 M-70 30.06, and a featherweight .308 ( the .06 was dad’s and the .308 mom’s). I enjoyed many seasons hunting with all 3.

Lately I’ve found the featherweight .308 to be a great gun for whitetail; a little easier to pack, and just as smooth and accurate as the others. I’ve never hunted with any other rifles, so I don’t have any thing to compare to. I just love these guns. I’ve climbed high country for mulies, and bushwhacked for whitetail.

These rifles have never let me down in 44 years of hunting. Current Winchester Model 70 rifles are lazer cut checkering with a few exceptions. I have from 1942 to current (2016) from JOC, Super Grade, Featherweight, High Grade Featherwieight Lightweight, etc. I own one Browning X Bolt and that too is a beauty. My firm conclusion is modern Winchester Model 70s are excellent. Compared to any rifle, anywhere. My only synthetic stocked model 70s are a Sporter 24 inch barrel 1985 and a pretty New but already no longer available .243 Ultimate Shadow Stainless Steel barrel and action.

I own about 6 custom stocks for those two rifles. The Ultimate Shadow is the only synthetic stock I like. The Sporter should be stocked with a Boyd Stock Black Laminate but my son thinks the after market synthetic is more appropriate, bad call I think. It’s lamentable the new and improved Winchester Model 70 isn’t chambered in 7mm Mauser (7×57); this perhaps remains the finest dual purpose deer/ elk caliber extant. Originally developed in 1892 by Paul Mauser of Germany the 7mm Mauser or 7×57 was formerly the standard military caliber of Spain, Mexico, Central America, and half of South American governments.

These Latin American countries, including Spain (1893), equipped their Armies with 7mm Mauser bolt action rifles to arm soldiers.

The 7mm Mauser is historical, versatile, classic, and venerable and would qualify on all counts for the annual deer/elk hunter who desires to fill the family freezer with vension and elk meat. Even for moose and caribou. Naturally both the .30-06 Springfield and .270 Winchester qualify as well.

Why so many different rifle calibers today? Many originated after World War II (1939-1945). Obviously improved modern smokeless powders, better primers, and superior bullet design made sense.

But again, why so damned many rifle calibers today , many of which duplicate and overlap in ballistics? Why not “keep it simple stupid!” A modern bolt action sporter rifle chambered in 7mm Mauser (7×57) and fitted with a quality 4x scope is all the average North American big game hunter needs.

Remember bullet placement, not caliber, kills! That’s funny. My Model 70 Black Shadow (the cheapie) is in 7mm08 (=7 X 51) which is a short variant of the 7 X 57, based on the Win .308 round. I picked my rifle as it was the only Model 70 in stock at the time of a sale, and I hung on to it grimly until a salesman hove into view to complete the sale.

The plastic stock might be a bit nasty, with rubberised hand and forward grip areas. I read of a guy who changed his stock for the wood featherlight version, but noticed a sunstantial increase in recoil as a result. The ballistic profile of the 7mm08 is such that beyond 200 yards it flies faster and therefore hits harder than the .308, and is also flatter shooting.

But as soon as I ran the bolt I knew that this was a piece of exceptional quality, regardless of external appearance. No regrets at all. And it fits a 4X Nikon scope as well! There ya go. “Controlled Round Push Feed” This webiste keeps using that phrase, I do not think you know what it means. THIS: is a controlled round push feed bolt. THIS: is a controlled round feed bolt. Now which one looks like what is featured on the rifle you reviewed?

That’s right, current model 70s are CONTROLLED ROUND FEED. My M70 is a post 2006 model made by FN and it has the CRPF bolt. (Actually I may have to check that, it may be a ’06 model but it is a FN made M70) It has the exact same action and bolt as my FN SPR A1.

And they both came factory bedded (my winchester has a much cleaner bed job than the SPR though). They will both single load rounds. I have to say I like alot of rifles out there but hands down the FN made Winchester M70’s are the best on the market today. They have one of the strongest actions with a thick integral recoil lug, great trigger and beautiful fit/finish. (all the wood stocked versions and the ones with the B&C stocks) Another potentially interesting TTAG review ruined with dumb, snarky writing.

You know what they say about guys who brag about their sexual exploits? Here’s a hot tip. Writers who name drop hot models and mention sodomy lubricant certainly aren’t getting anywhere near the former, and their writing deserves the latter. REVIEW THE DAMN GUNS – keep your gutter mind to yourself. Such a poor review on so many levels. While I know nothing of the author, I’d guess from the article that the majority of their experience and tastes in rifles lies with shooting .223 AR’s. I question how the author can feel qualified to write such a review.

“With the assistance of Browning and FNH, the Winchester Model 70 has matured and grown into an excellent weapon platform for the nostalgic sportsman who doesn’t want to sacrifice functionality . . .” Do you really think it took Browning and FHN to “mature” the M70 into a decent “weapon platform”? Hmmm, makes me wonder about the pre 64’s, that are revered by so many. While even the standard production ’64 to 2006 rifles disappointed a number of people (when comparing them to per 64’s) they were still better built rifles than much of the competition.

They just couldn’t live up to their previous reputation. “I’m no engineer, so I decided to forego delving into the technical aspects of the rifles and instead focus on comparing their fit, finish, & feel.” Well this is a gun review right? You don’t need to be and “engineer” to understand some of the most important aspects of a rifle. You’d think the gas ports, barrel shroud, 3 postion safety, one piece bolt design, full length extractor, intergral recoil lug, etc, etc, etc, would all be very important aspects of a rifle to consider when doing an actual “review”.

The article did get into CRF vs. push feed, but there’s significant inaccuracies with that portion of the article.

Oh yeah, did you know that first year production of M70 was in 1936? I don’t know where the 1927 model came from. “Ergonomics * * * * 1/2 The Model 70 offers a nice balance of functionality and aesthetics. The bolt knob and forearm feature aggressive yet handsome checkering. If the Model 70 sported an adjustable comb and LOP it would be flawless.” Aggressive?? Does that accurately describe it? I don’t think so. However, here’s the real offending comment… It should have an adjustable comb and LOP???

Oh my, that would absolutely ruin such a rifle. What can I say here, this writer doesn’t get it, and it seems obvious to me they aren’t a hunter either when I read comments about “carrying” game from the field.

I also mention that lighter, slightly compact rifles without 24″ barrels are not just for hunters that have “too much heavy gear”. I’ll briefly mention that rifles are not suppose to be “balanced like a fine over under shotgun”. “The recoil from the Winchester Model 70 can be punishing” Hmmm… You never mentioned that the gun you reviewed weighs in at 7 lbs, which is NOT a 6ish pound ultralight rifle these days. You also never mentioned the Pachmayr Decelerator recoil pad that helps to mitigate felt recoil.

I’m really disappointed when someone writes about “punishing recoil” from a .30-06 in a 7 lb rifle with a premium recoil pad. This isn’t a man up comment… but a person needs to learn how to shoot a hunting rifle with a very common cartridge first, before feeling qualified to make such a comment. Those words demonstrate a real lack of experience IMO. Yes, my words are strong here, but this article does little for me in terms of adding to any credibility of this website.

Yes… I’m disappointed. …and I didn’t even get into my thoughts on the authors comments referencing a sex lubricant when trying to describe the old rifles action. I will say that it might have been worthy to actually do a comparison of the two models triggers and then even mention something at all about what the trigger felt like on the current production rifle. … The use terms that mean something to gun people like “creep” “takeup” “overtravel” crisp vs mushy” etc would have been useful.

Lastly, while it never saw standard issuance, the Mod 70 did indeed see some military use as a sniper rifle, even though many people are only aware of the Rem M700 seeing this use.

Like I said, lots of problems with this article. Don’t forget your Tactical Bacon to go with that! (yes, there really is such a product–Google will prove this) Gotta admit, that Winchester M70 is looking pretty good.

It’s unfortunate that the push-feeds took such a publicity hit, because they seem just like the Rem 700’s that way, and Rem 700’s are good rifles. I tried out a Black Shadow, and it seemed to shoot pretty darn well, better than I can, anyhow (not that that’s saying much). The rifle also just felt very solid. Maybe if I can find a used push-feed M70 for a good price, since people don’t seem to like ’em…that might be a good prospect! – T Oohh cool thanks man 🙂 I also saw on the history channel they where going through sniper rifles and all and they mentioned that the Model 70 served in Vietnam and special forces used it.

I have one 🙂 and it’s sssooooo cooooooll lol I have the synthetic black stock on her and I’ll tell you what it sure does let you know you pulled the trigger haha thanks for the reply man I own a pre war Model 70 stamped .30 GOV’T 06. It is a killing machine. The action has been cycled so many times the lugs are truly hand lapped. I also own a Model 70 featherweight Classic from the early 1990s. This rifle is chambered in 6,5 x 55 Swedish Mauser. This rifle too is incredibly accurate and reliable.

It also has the benefit of being virtually recoil free. It is not hand made like my pre-war one is but it’s is an outstanding rifle. I did remove the “new” Winchester trigger and put a fine Timney trigger in it with about 2+ lbs pull. My pre-war Model seventy wears a 2×7 Weaver Widefield from the early 1960s with a Redfield Jr base. The newer Model 70 is fitted with a Zeiss using S & K bases and rings. As my old Daddy would say “…it’s slicker’n a mink.” I read all your comments and liked them all.

I have to say my old man has a 70 featherweight chambered in the BOB and with out a doubt that piece of weapondry is like a very very fine lady. I am 40 years old and in the deer season of 2012 I was getting ready to go out to hunt in northern michigan with my 30-30 my old man said take the BOB I said no , he said yes, ill take my 1917 enfield in 30-06.

I said ok and when I walked out the door he said”if you put a scratch on that ill kick your ass” I shot a deer 2 hours later. No scratches. My pre-war Model is all milled steel. The Classic Featherweight has some “issues”.

The bolt release is stamped steel. It pivots about one of the pins that holds the trigger in place. The hole stamped in the bolt release is too large and the Spring a little weak. And do the bolt release tended to wobble.

I tweaked this when I replaces the trigger with two nylon washers. I drilled the holes in the washers a few thousandths undersized. I put one washer on either side of the bolt release. No more wobble. The bottom metal on my pre-war is known as two piece an dustily uses three machined bolts/screws. See note above re same. The bottom metal on the Classic is one piece. It is steel but not machined to save weight I have heard.

New steel bottom metal can be breathtakingly expensive. It can easily run $450.00. But it is beautiful and sounds do much better when closed. The Oberndorf release is more appealing to me also. I put a Dakota grip cap on the pistol grip but left it unblued. I always polishing it. I also installed a Pachmayr decelarator. It increases the length of pull slightly and frankly there is virtually no felt recoil. I like the S & K Scope Mounts and Rings. I put a David Tubb firing pin and silicone spring in the bolt.

You must also purchase another bolt shroud. With the 2 pound Timney Trigger and the Tubb firing pin and spring the lockup is frighteningly quick. For my purposes instantaneous. Been using Norma brass Remington large rifle primer and IMR 4831 pushing Nosler 140 grain partitions right at 2,800. These rounds when well placed are devastating one hit wonders on Texas Whitetails,hogs & coyotes. My father built some kind of rifle for beach grandson then shot the hell out of it so that by the time grandson received it was in his words slick as a mink.

That’s the path I am taking with the Classic Featherweight in 6,5×55 SE for my Grandson Jameson Brooks Barnett. I am 64 6’3″ and go about 247. I shot the pre-war Model 70 in ’06 with the Neidner style steel butt plate for 25 years. Recoil is not an issue. She’s my baby and smooth as silk it has the old model 70 trigger that has been worked over by a very competent trigger smith.

I have no gauge but guessing it breaks about 2 lbs possibly just less. I have been 3 years building a new stock. Except for power drill to drill the holes for the action screws. I rebuilding the pre-war model right now. Started with a “nice” piece of walnut. Three years later using hand tools only it is really starting to look nice. Will post Pictures of both as I learn how to do so I’ve owned a model 70 Lightweight for since the early 90s.

I traded a 9mm pistol for it. I mounted a Redfield Tracker 3x9x40, that my father gave me in 1983. I still hunt with this same set up.

Rarely have I had to fine tune the accuracy of this combination. When I put the cross hairs on a deer and pull the trigger, we’re eating meat. I love this rifle. I have a 1981 model 70 featherweight in .270, that i have over 200 kills with-it’s priceless to me-my go to rig…..also bought a vault queen last year-a 1982 model 70 featherweight for my wife in .270 after she tried to take mine from me-we take the twins when we talk serious bullet placement-drop them in their tracks The Winchester Model 70 is a fine rifle.

Although I like the Ruger better in my rifle collection. I owned Rugers, Winchesters, and Remingtons. I always got Sub-MOA with all my Rugers; Ruger M77 Mark II .223 Remington, Ruger M77 Mark II .270 Winchester, Ruger M77 Mark II .30-06 Springfield, Ruger M77 Mark II .338 Winchester Magnum, and last but not least, Ruger M77 All Weather .22 Hornet (best on the .22 Hornet was 1″ MOA), and all my rifles are always Stainless Steel, because I’m from Alaska where it is cold, humid, and winter most of the year, and the black finish rifles rust easily in Alaska.

I own a Winchester Model 70 .270 Winchester, and I bought it for $400 with a VX-II Leupold 3x9x40 (I bought the rifle for the scope price alone!!!). I went to check the zero on it, and I could not zero it.

I rebuilt the whole rifle; installed a Hogue Full-Bed stock, brand new Leupold VX-II 3x9x40, replaced low rings with medium rings, glass bedded the action, and free-floated the barrel. I went to the shooting range with two different factory ammo; Remington Core-Lokt 150 Grain Soft Points, and Winchester Super-X 130 Grain Power Points, at a 75-100 yard range.

I zeroed it in with the 130s, and the best I got at 75 yards was 1″ MOA, with a few fliers. I tried a 100 yard zero, and there was more fliers, and I only hit the target once, the rest were fliers (I checked groupings without adjusting zero on scope, there was fliers). Wind was only 4MPH and I was shooting against the wind. At about 75 yards, I tried the Winchester Model 70 .270 on a ‘STOP’ sign, and I aimed in the middle of the O, and I shot about 1″ low and 1″ left from the middle of the O.

I like the Winchester Model 70. 270 because it has a longer barrel than the Rugers, but I can not zero it to Sub-MOA. In my opinion, I guess my Winchester Model 70 .270 is a picky eater for bullets, maybe some hand loads would improve it to Sub-MOA? Someday I will get a reloading kit and try out hand loads on my Winchester Model 70. 270. The best rifle I own is my Ruger M77 Mark II .30-06 Springfield. It can shoot in the same bullet hole twice at 75-100 yards.

When I put my new VX-I 3x9x40 Leupold on my Ruger M77 Mark II .30-06, I bore sighted it and went to check the range at 100 yards to zero it, and on the first shot, I shot the target!

I checked a 3 shot grouping, and all 3 hit the target, 2/3 shots in the same hole. I did not need to adjust the zero after I bore sighted my rifle (major luck out!). My Remington Model 700 .30-06 is a biased rifle towards me, or it is a poorly made rifle (Remingtons are good, but this one is no good)!

I bought so much ammo for this, both factory and hand load ammo from friends and family. Also glass bedded the action, and went through 3 new scopes through this, and couldn’t zero it. The trigger was such a trigger creep! The most heaviest trigger I ever felt. If there was an uploader on this website to upload photos, I would show all my pictures of my zeros and MOAs of all my rifles.

The Rugers are the best, most reliable, most accurate rifle ever made! And the Ruger M77 Mark II (NOT the Hawekeyes) Stainless Steel finish is the king of kings of all Stainless Steel rifles!

I owned a Ruger M77 Mark II .270 Stainless Steel since the day they were made, and there is not a rust or scratch on it! I also owned a Ruger All-Weather HAWKEYE, and it was a piece of JUNK. The first day I went to zero it (summer time in Alaska), it already rusted up on the barrel. I sold it, and I never even owned it for a week. Few years later, I seen the All-Weather Hawkeye first time since I sold it, and it was all rusted up.

My Winchester Model 70. 270’s Stainless finish is way better than the Hawkeye, and my Winchester has very little rust and scratches for an 8 year old rifle (I looked at serial # online, its a 2006 Model). Here in Alaska, we hunt all kinds of animals; seals, moose, whales, walrus, etc. And a good, reliable, life-time guarantee rifle is a must have for every man who loves hunting. The Rugers and Winchester Stainless Steel rifles are the best to own in Alaska because of their accuracy and their reliable rust resistant Stainless finish rifles.

In my opinion, the Ruger is the way to go because they will zero in with most any type of ammo without affecting the MOA or zero adjustment. With any of my Ruger rifles, if you want to shoot a seal in the eye at 100 yards, you will hit it in the eye guaranteed. I’m so glad I own these rifles, they are not apple to apple shooters, but coin to coin shooters! Boom, eye-shot you! I own a number of Model. 70s.

They all are incredibly accurate. I have enough Rugers to say they are accurate too. But Model 70s that far off Rugers? Not my experience or that of many others. Many used rifles were mistreated and finally got sold as they just didn’t. Have what it took. My favorite Ruger is the Super Blackhawk .357 Magnum. I have seen rifles that weren’t even close to that accurate. It is though heavier than my .45 Long Colt Ruger Vaqueros,of which I had a matched set, until I decide I preferred the single holster set up.

I’d recommend a Redfield Revolution, or a Leupold VX-1, either in 3-9×40. At $199 for either one, they’re fine riflescopes, lifetime warranty, and won’t break the bank. If you want higher magnification, consider one of the Simmons Whitetail Classics in 6.5-20×50. Those things are $109 over a MidwayUSA and are a solid scope for the money.

Either of these choices should do very well on your .243 Win. – T To bad this is so later than your post. I use both Leupold and Nikon Prostaff five or sevens…..they are all very good scopes and the Winchester Model 70s Rae about my best rifles.

I do own Tia Remington Model 700s that are wonderful…..but I prefer them as the older models….new rifles? Dealers, buyers, and serious riflemen seem to have a decided preference for the Model 70.

Just helped a few friends get new Model 70s from Featerweight to Suoer Grade. Every rifle was quality through and through. I own a couple of very new Ruger M77…..they are nice!

Still if I had to pick just one bolt action rifle it would be a Model 70. One comment though……try to get one with a good wood stock. Synthetic stocks are not my thing and I do not think they hold up any better. And yes I own several of them. If I wanted an after market stock, I’d get the Black laminate (birch) Boyd stock which is tougher and really pretty, this is one lovely stock! After being ask to a range to grade and comments on some new hand weapons that was on the market or soon would be coming to the market I met a group of Rifleman that some had a very nice collection of hand and arm weapons.

I have a simple set of rules for firearms for myself” Multilevel target systems, and straight flat line shooting, or open choke and fishing sinkers broke in half for home defense that lays in a blanket under my bed..

I was trained with a side mount scopes and steel sites. And even today all the new tech that’s out there I can say with no doubt that the feather lite model 70 in 7/62 either in the brush or in the open range in any weather is not something you want to come against, especially if the shooter is trained in head shots.

For game hunting in standard hunting, I prefer that old lucky 303 Brit infield I Bought at Big G 35 years ago for 79 dollars, My brother has a Woodmaster 742 that I understand you get a goodone or a lemon I had no problem with it I jump three one ,morning and filled all my tags right then Winchester is one of those weapons that fit certain people that allows them to make above amazing shots and do some amazing shooting and that is with a standard bolt riffle action.30 cal There are some awsome stuff out there Barrett, Fnar, Morgan, Lau pau, auw siut, and the list is huge As for Remington I’ve got a couple for friends to use but they don’t smell right to me and we just don’t hit it off, I was trained with colts and S-W Beretta but Glock just don’t work for me, I would use if had to butt had much rather use my 92 FS, or some good custom hot hot round in my 357 mag.

To finish I will leave you with something that I feel was that thing I was told, never loose your skill with steel sites and never accept a mount that takes them away from the Riffle that alone is stupid” Plus side mounts are a sign of real skill Skill and talent isn’t what get the job done it is a great bid blessing from GOD ALMIGHTY of LUCK You fire that round off right when every thing was in your favor. Sign Brougan$$$ 714 I bought two of these Win 70’s in lightweight about two years ago.

One for my grandson and one for myself. I will agree with everything positive and good said about this rifle.

I love mine like a pig loves watermelon. The one thing I found out about these new guns made in SC is that the one piece scope mount screw holes will not line up. This is a minor issue, the two piece work fine. I called the maker of these (I can’t remember the brand now) and told them of the issue so they might have started making them by now.

At the time, I would not be deprived of mine, so I cut and welded the thing back together. It turned out fine, though I will tell you that welding will make a piece of metal curl up like a potato chip if you aren’t very careful. I believe the new Win 70’s are better than the pre 1964 models because their trigger is better. The trigger with the M.O.A. is unbelievable.

It doesn’t seem to move at all and since it doesn’t, not knowing the instant it is going to fire will make your shots more accurate. I have two pre 64 modle 70’s. One in 308 which I have killed an elk with and one 270 which was my grandfather’s and to the best of my knowledge hasn’t been shot since before I was born”about 40 years” I just haven’t got around to it.

I also have a 1970 something 223 which I have killed several mule deer with and few thousand ground squirrels. I bought a 7mm wsm a few years back it is a 2001 and is a controlled round push feed. I just looked on the winchester site they dont chamber the 7mm wsm any more but they drop the pre 64 action in every sentence. I dont think they do the controlled round push feed anymore if so its only in the three other wsm which they will probably drop soon. The three position Model 70 safety takes some getting used to!

Make sure the bolt is completely closed and the rifle empty, then grab the safety fairly vigoursly and push it thru each of the three positions….it starts to get a little easier to peddle thru the three positions after you get used to it and the rifle does too. Fact is it is a really great safety. But it does take some force and dexterity to get it in the three positions, mostly until you get the hang of it!

One problem I had at first was the Remington 700 safeties which are quite different. The Model 70 three position safety and all other features is when you get used to it…..perfect. I never saw a Model 70 rifle which was less than perfect. I have them from built in 1942 (the first rifle I ever used) to very recent. The new ones are awesome and a value which I find hard to believe in this day and age. Still I really do search for the nicest wooden stocks…..some are very nice. The synthetic stocks I like the least…..but I have a very new Ultimate Shadow Stainless that I can hardly bear to put the Boyd black laminate custom stock I got fir it…as the Ultimate Shadow synthetic is very nice!

Left handers have a fair challenge facing them. There are few Model 70s out there with that. My brother Kermit, is a lefty…..he uses Weatherby because of that. I see some older ones available once in a while. Presently I do not know of a solution.

I would call Winchester Service Center in Arnold Missouri and ask them. I am CERTAIN they will be able to get one. Then sell the stock right handed stock! Hello I have a Winchester Model 70 .308 heavy varmint barrel… Serial no.

8634xx i am trying to find out what year my 308 was made but not sure if i found the right information… i found two different result one was between 1913 and 1914 and one was between 1967 and 1968 … Would someone be so kind to let me know the exact production date….

Thank you so much for your time son I have 2 m70s in 30-06,my fathers and my own. my dads is a 1963 modle feather wt. customized with a 18 in. barrel and custom stock. mine is a pre-64 action stainless with a 24 in. barrel. both shot straight as an arrow with both 150-grain or 180s.As a hunter they don t miss moose 5caribou and enough whitetails to be proud of and a wall full of hornes.I wont be selling them as I have 2 grandsons to hand them down to.

Prior to 1937, Winchesters bolt-gun was the famous 54. I also own one of these 7X57 Featherweights. I believe they were introduced at the 2013 Shot Show. Only a few made it north to Canada and I was fortunate to get one. I killed a 5X5 Whitetail with it here in British Columbia in September 2016.

Great rifle. Cheers I have a Model 70 Featherweight in .243 made in 1993. It is a beautiful gun and I have taken nearly three dozen deer with it. That being said, it has cost me a couple of deer due to jamming issues on the follow-up shot. I don’t know about all this controlled round feed, controlled round with push feed, etc., I just know it has jammed on a couple of occasions — using the same type of ammo for 20 years. I switched to a Remington Model 700 in .243 with true push feed and haven’t had any jamming issues on 2nd shots–on deer or at the range.

The Model 70 may be a prettier gun but the Remington is more reliable in my opinion. I own both Remington Model 700s and Winchester Model 70s. Both load flawlessly under any conditions. The reason I own more Model 70s is that recent Model 700s seem to have cheapened, the Model 70s seem to really have it together. Also all the dealers see it this way too! Many of my .243 are Winchesters, my Remington’s are .222 and .280. The .Model 70 .243s reallynare amazing so Imam surprised at this last post.

But despite the fact that I never saw a singke bad Model 70, and recent Model 700s are trending less attractive….Not all rifjes from any manufacturer are perfect! My grandfather bought me a Model 70 308 for my first deer hunt at 14 on the mesa in Colorado. We packed in on horse back. I am 72 so you know how old my Model 70 is today. I shot my first deer and thankfully the scope and rifle made up for my inexperience.

So like a dummy I sold it when I was in financial problems. To this day I regret that. If you have an early one DO NOT ever sell it. One of the most amazing rifles ever produced. Mike Bought one in .243 in the early 90’s and have used it to kill about three dozen deer. Very accurate but sometimes there was jamming on follow up shot and I never have liked a three stage trigger. I now use a Remington in same caliber. The bolts on Remingtons are better and I love a quiet easy two stage trigger.

I still have a Winchester Model 70 in 3006 that my father got for me in 1956 from Abercrombie and Fitch in NYC. At the time we were on home leave from India where I first learned to hunt. Since one could see and be confronted by dangerous game such as tigers and leopards even when hunting antelope, I once had a tiger cross a trail in front of me at 10 yards while carrying a twenty-two, both my father and I felt it was time for me to have a larger caliber rifle.

This rifle has served me well for many years and still is a joy to shoot.


best dating winchester model 70 270 wsm accuracy loads

I bought this rifle a couple years ago, from a pawn shop. It's in excellent condition, and I got a great deal on it. It seems to be a little different from a basic model 70, as it has a heavy barrel, which looks professionally floated, but I think it's factory floated. It's a heavy rifle, and the forearm is "fat", almost like a bench target rifle, but it is not "flat", as most bench target rifles are on the underside of the forearm.

It just says Winchester Model 70 270 WSM on the barrel. The serial number prefix is a G. I took a couple of pictures with the serial, and was wondering if anybody knows if this is simply a "plain" model 70. It is extremely accurate. Thanks....Rick Richard, The subject rifle is not a "Winchester" Model 70. Instead, it was manufactured by the U.S. Repeating Arms Company (USRACo), most likely after the year 2000.

While there might be someone on the WACA forum who can answer your question, in general there is very little interest in the modern Model 70 rifles. Bert


Gallery of Guns TV - Winchester Model 70 Super Grade
Best dating winchester model 70 270 wsm accuracy loads Rating: 9,4/10 315 reviews
Categories: best dating