Microsoft Windows Mobile Device Center последняя ПО для синхронизации мобильных устройств на базе WindowsMobile с персональным компьютером под управлением Windows Vista/Windows7. Системные требования, дополнительные сведения и описание процесса установки. Дополнительные сведения. Вы можете использовать Mobile Device Center 6.1 только с аппаратами, работающими под управлением Windows Mobile 2003 или более поздними. ActiveSync и Windows Mobile Device Center не работают с устройствами Windows Embedded CE 4.2 или 5.0, Pocket PC 2002, или Smartphone 2002.
Windows Mobile Device Center is an updated data and device management system used between Windows PC and Windows Mobile devices. This is a replacement of an older, but similar program from Windows known as ActiveSync. In short, it allows users to easily share data, such as pictures, music, and files from their Windows Phones and their home computer. The layout is easy to understand and a brief tutorial helps new users get up to speed with the program.
It does a great job of simplifying the entire file sharing and media management process required by today's smartphones. If you have a Windows Phone, you definitely need this program to get the most from your device. A Place In The Business World. As usual, Windows pays special attention to the needs of the modern businessman. Many aspects of this program are designed for the synchronization of important files and business data. Albeit, it's for sharing data of any origin, but it's the businessman who find this tool irreplaceable once they've installed it.
Using the Windows Mobile Device Center, a businessman can quickly establish new PC-to-device partnerships, share vital business information and records, and manage customizable synchronization options. It's possible to share e-mails, calendar events, media files, and contacts. Ease Of Use. Windows typically takes pride how their programs are easy to install, understand, and use.
Windows Mobile Device Center is no different and does a great job of streamlining the entire setup process. Even the included partnership management tool comes with a new setup wizard to help users create the lasting partnership between their device and their computer. The entire interface has been enhanced to improve the overall user experience. Users will find that it's easy to navigate all of the possible options, settings, and locations between the mobile device and the PC.
Additional Features. There are plenty of features that the average person and advanced user will both love. For example, photo management tools allow the user to discover new photos on their phone and instantly import or move them to their Windows Photo Gallery on the PC.
The media synchronization performs a similar job with music files stored on their mobile device. There is also an included file browser if they need to browse the individual folders on the phone and make specific changes.
Pros: • Streamlined installation and setup process. • Partnership Management tools for connecting to new devices. • Easy to manage, synchronize, and backup media files from your phone.
Cons • Microsoft Outlook is required to sync emails and contacts. • Known to encounter problems with certain phones.
best skout dating windows mobile device center windows 7 - Windows Mobile Device Center Download
This probably applies to a limited number of people, but--- Has anyone been able to synch a WM Device in 7 yet? My WMDC 6.1 crashes everytime. Any one have any ideas? Can't find any one else having this problem...which seems discourageing. I NEED TO SYNCH MY IPAQ!!! HELP!!!! I am truely lost with out my calander and contacts in 14 places
I have installed the Windows 10 Creator Update. This stops Windows Mobile Device Centre from working and doesn’t allow the connection of any Windows CE , Windows Mobile Devices and Emulators synchronising with the PC. I have uninstalled Windows Mobile Device Centre and reinstalled but still doesn’t work. Please can you let us know if there is a fix for this as we use this program every day. Many Thanks, Dave Hi Dave, Firstly, make sure AutoPlay feature is enabled. Then, update system to the latest build 15063.14.
Install WMDC in compatibility mode again to check result. If still no help, please feedback this situation via Feedback Hub app. Regards Please remember to mark the replies as answers if they help. If you have feedback for TechNet Subscriber Support, contact .
Hi All, I have tried everything but still doesn’t work on Build No 1703, was fine until I upgraded last week. Any other suggestions will be appreciated. This is going to cause us and a lot of other people a massive headache as we rely on this software to connect up Windows Mobiles & Windows CE Devices to load software.
If we don't have this facility anymore not sure what we are going to do. Please can somebody in Microsoft help on this as there are lot of handhelds worldwide that rely on this.
This needs to be resolved soon as possible. Many Thanks, Dave Hi, try to change an user account, which is used to start "Windows Mobile-2003-based device connectivity" Service (WcesComm). Originally the "Local Service" is used. After changing to "Local System" I could start this service and the Motorola device has started to connect to the pc. The only problem is now - it connects only once.
After disconnecting and connecting I have to restart "Windows Mobile-2003-based device connectivity" and "Windows Mobile-2003-based device connectivity". Looks like, the "Local Service" account's permissions have been changed in the creator update and the WcessComm cannot create a semaphore (permission denied). Alexander Does this mean that you have to log in on a different account on the PC? Or can you run the service in a certain mode?
No, you have to change a service user account (Log On As) of this service. You need for this an administrative account on your PC. You need also the permissions to restart this service everytime after disconnecting and reconnecting the device. I agree and hope, MS will fix it. Otherwise for many of us, how writes applications for and support the old windows mobile the Creator Update is no-go...
Same here. I am able to get Windows Mobile Device Center (WMDC) to install, but not fully run. Installing required manually enabling the .NET Framework 3.5 similar to as described at the following web page. https://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/how-to-instal-net-framework-35-on-windows-10/450b3ba6-4d19-45ae-840e-78519f36d7a4 After install, you must right click on Start, and then click on Computer Management > Services & Applications > Services.
Scroll down to right-click on "Windows Mobile-2003-based device connectivity" to select Properties > Log On. Switch to "Local System account" with checking "Allow service to interact with desktop", click OK, and then Start the service. On the handheld, tap on Start > Settings > Connections > USB to PC icon, uncheck the “Enable Advanced Network Functionality” checkbox, tap OK, and then connect the cable.
WMDC never shows connected, but ActiveSync on the handheld does, and you can at least open File Explorer on your PC to go to the drive with the name of the device to “browse the contents of the remote device” for transferring files. Though I am not sure how much this limits RAPI functions. These Services settings changes sometimes must be re-applied when you Restart your PC or just when you disconnect and re-connect a device. So this is obviously not a final solution.
I am not sure why the “Windows Mobile-2003-based device connectivity” (WcesComm) and “Windows Mobile-based device connectivity” (RapiMgr) services sometimes only work with the old “USB ActiveSync serial PPP” driver, while only on rare occasions these work with the newer “USB ActiveSync RNDIS” driver. Hi So, after some debugging and searching the problem seems to be solved even with Local Service account. The creators update has a new feature, related to svchost.exe: the services will not share by default the same svchost.exe, even they are assigned to be run within of the same group with -k option.
More detailed has been Rapimgr and Wcescomm (Windows Mobile-based device connectivity and Windows Mobile-2003-based device connectivity) are such services: they are defined to be started in the same shared svchost.exe (-k WindowsMobile). RapiMgr creates a kernel semaphore AS_ACCEPTANCE_SEMA, because it starts first.
WcesComm tries to do this too, but fails: the semaphore has been already created and should be only opened. This will fail: not enough permissions (remember: two different svchost.exe, different SID, etc).
So, wcescomm is just stopped. The fix is simply: add SvcHostSplitDisable to the both services RapiMgr and WcesComm: REG ADD HKLM\SYSTEM\CurrentControlSet\Services\RapiMgr /v SvcHostSplitDisable /t REG_DWORD /d 1 /f REG ADD HKLM\SYSTEM\CurrentControlSet\Services\WcesComm /v SvcHostSplitDisable /t REG_DWORD /d 1 /f Both services should have the same Local Service Account. You have to reboot after this change. Added: Both services should have on Recovery tab in "Subsequent failures" the "Restart Service" enabled.
Seems, RapiMgr crashes sometimes on the device disconnecting. Hi Kevin, Can you send me a screenshot of the Reg Keys and values or end me a copy of the RegFiles. Email Address David.Payne@datalinx.co.uk Thanks Dave Open a command prompt as administrator, and put Alexander's registry lines in one at a time.
After the first entry, hit Enter and you'll get a confirmation that the command was accepted. Do it one more time for the second entry. Then reboot. You won't see those lines in the actual registry, but it works. Also, to be safe: run Windows Mobile Device Center in compatibility mode for Vista. You folks just saved my bacon. Shipping out for 14 day remote survey in AK, and field tablet updated last night and suddenly no connectivity between Trimble GPS and tablet.
I didn't have to enter the code (yet), as everything appears to be functional again, but at least I can transfer data between tablet and GPS now.
Thanks again, and ain't technology grand? Cheers, Jake I typed the command lines one at a time. Once I clicked OK for each one, a message screen flashed so fast I cannot read whatever it said. I rebooted the computer and tried to open WMDC....still hangs up on the greeg Start screen.
At restart I get an error message: Microsoft.NET Framework Unhandled exception has occurred in a componnent in your application.
If you click Continue, the application will ignore this error and attempt to continue. C:\Program Files (x86) \HP\StatusAlerts\bin/...\resources\images\status_critical_32.png (I tried posting the message but new users apparently aren't allowed to post photos on this page) When I click OK I get another partial screen with just an OK and Cancel option.
After clicking OK I try to start WMDC and it again freezes at the Start Screen WMDC still hangs up at startup. What am I doing wrong? The fix works very well, but by making this fix I’ve another problem when copying shortcut files to the device, before it was prompted for copying files and some something like “do you want to do it anyway?” and now it just play an error sound an continues without copying these files, and no pop-up windows is appearing .
Any Ideas? See below picture. jom https://stackoverflow.com/questions/43394045/windows-mobile-device-center-stops-working-after-windows-10-1703-upgrade/43395822#43395822 has more information on how to do these things. Seems actually fairly easy and now its working perfectly. I personally uninstalled windows mobile device center. Enabled Compatibility with Vista, Ran it as admistrator Went into services Enabled Windows Mobile 2003 based device connectivity If it complains it can't start and will auto close Go to properties, then log on, Click Local System Account, and Allow service to interact with desktop.
Press OK Start Service Launch Windows Mobile Device Center. Should work just fine now. Hi, try to change an user account, which is used to start "Windows Mobile-2003-based device connectivity" Service (WcesComm). Originally the "Local Service" is used. After changing to "Local System" I could start this service and the Motorola device has started to connect to the pc. The only problem is now - it connects only once.
After disconnecting and connecting I have to restart "Windows Mobile-2003-based device connectivity" and "Windows Mobile-2003-based device connectivity". Looks like, the "Local Service" account's permissions have been changed in the creator update and the WcessComm cannot create a semaphore (permission denied).
Alexander Hi Alexander, Could you please confirm that when you say this: "After disconnecting and connecting I have to restart "Windows Mobile-2003-based device connectivity" and "Windows Mobile-2003-based device connectivity""- do you actually mean "After disconnecting and connecting I have to restart "Windows Mobile-2003-based device connectivity" (WcesComm) and "Windows Mobile-based device connectivity” (RapiMgr)."?
Regards, PTpc Hi Kevin, Can you send me a screenshot of the Reg Keys and values or end me a copy of the RegFiles.
Email Address David.Payne@datalinx.co.uk Thanks Dave Open a command prompt as administrator, and put Alexander's registry lines in one at a time. After the first entry, hit Enter and you'll get a confirmation that the command was accepted. Do it one more time for the second entry. Then reboot. You won't see those lines in the actual registry, but it works. Also, to be safe: run Windows Mobile Device Center in compatibility mode for Vista.
"You won't see those lines in the actual registry" - yes you will, after you refresh the registry view, or after you reboot and check. Not working for Windows 10 1703 OSBuild: 16251.0 Windows could not start the Windows Mobile-2003 based device connectivity service on Local Computer. Error 1079: The Account specified for this service is different from the account specified for other services running in the same process. The reason for the Error 1079 is that the related service also has to be logged on using the same account.
In other words, you have to make the log on changes to both “Windows Mobile-2003-based device connectivity” (WcesComm) and “Windows Mobile-based device connectivity” (RapiMgr). Then you will be able to start both services. Try starting the second one (RapiMgr) first after changing the log on account. Perfect! We use Motorola MS32N0 scanner guns (running some kinda crazy Windows version) to do our inventory receiving and inventory.
They stopped connecting properly the same day that we got an automatic Windows update. Was sort of a disaster. I made the changes in Services, added the registry changes, then reset the PC. No more issues. You saved us, Alexander.
Thanks! I had the same problem with both win CE devices and win Mobile Embedded devices. I know they are all CE based devices however they seem to be treated differently in this case. While this worked for the CE devices I had to go further for the Embedded. Seems the Firewall settings also changed so you have to change the allow apps thru firewall to allow Wireless portable devices thru.
Once I did this the embedded devices worked as well. Hi Alexander Your suggestion was very good, but now we have yet another Windows version 1709.
I have just made a fresh (clean) install of Windows 10 x64 version 1709 and it is a total disaster. It is impossible to even install WMDC. Installer displays some useless message and that is all. Is there anybody who was able to at least install WMDC on Windows 1709?
Andrew Hi Andrew! I'm facing the same exact problema and opened a new thread: https://social.technet.microsoft.com/Forums/en-US/557e9694-0e45-409e-9bb9-8a7139eb2088/windows-mobile-device-center-wont-install-on-windows-10-fall-creators-update?forum=win10itproapps Trying to install WMDC on a new machine gives the following error 'T here is a problem with this Windows Installer package. A DLL required for this install to complete could not be run.
Contact your support personnel or package vendor. Action MsiProcessDrivers, entry: ProcessDriverPackages' Tried with Compatibility mode, but made no difference. In Event Viewer I can see this crash:
Windows Mobile Device Center no longer works after Creator's Edition in Win10