Best way to connect macbook pro to 4k monitor

best way to connect macbook pro to 4k monitor

Forums Macs Notebooks MacBook Pro. 13 MacBook Pro and 4K screens . Discussion in 'MacBook Pro' started by Populus, Jul 23, 2017. Tags: 4k 60fps The Thunderbolt 2 dock also has HDMI, but that is only good for 4k at 30hz, so there is no way to connect both monitors using the dock I have. OWC also makes a Thunderbolt 3 dock ($299), which would allow you to connect both monitors and charge your MacBook Pro all only using one Thunderbolt 3 port. The Thunderbolt 3 dock has mini-display port (for one monitor) and a Thunderbolt 3 output (for the second monitor via TB3 to DisplayPort adapter). This is the most elegant way to do it, but the dock is not cheap. I wasn't willing to shell out another $299 when my Thunderbolt 2 dock is only abo .

best way to connect macbook pro to 4k monitor

With OS X Mavericks 10.9.3, Apple implemented official support for 4K video for the first time. Along the way, the company published an for the technology which has been updated a few times since then. Apple's document doesn't tell the whole story. There are computers outside Apple's officially supported machines that can push 4K video, and other things users can do to enhance the experience, even if they are on the supported list.

General pre-project advice The best possible advice in dealing with 4K video is to be sure that every link in the chain will do what you need it to. While some generic HDMI cables will carry the signal fine, and some DisplayPort cabling is fine at lower resolution, others are not.

Knowing that you have a 4K-compatible cable in advance eliminates a great deal of troubleshooting effort along the way. 4K is the future, but there's no reason you can't get ready now with your older gear. Additionally, users of Thunderbolt docks should ensure that the unit in use is capable of the higher resolution, and has the newest possible firmware. If the dock can't handle 4K, then no amount of software and driver chicanery will pass a 4K signal.

The same advice applies to HDMI switches and A/V receivers as well. MacBook Pro While Apple support is limited to the 2013 Retina MacBook Pro line, owners of the original 2012 model running aren't left out in the cold. With proper cabling, , the 2012 model can display 4K video, at 30Hz —sufficient for nearly everything but gaming for most users.

In our trials with 4K support on the 2012 Retina MacBook Pro, we got the best results with HDMI. Some Mini DisplayPort to HDMI cables worked, and some did not, with no clear way to tell the difference between them. Some monitors work straight out of the box with the MacBook Pro. Others, depending on cabling sometimes, need a feature called Multi Stream Transport (MST) enabled for use at 60Hz.

The macOS deals with this automatically on the computer side, but the feature may need to be activated manually on the display, and varies widely by manufacturer.

In Windows through Boot Camp, the 2012 Retina MacBook Pro outputs 4K video at 60Hz fine when connected through any flavor of DisplayPort all the way to the monitor. 2015 and 2016 MacBook While the USB-C port on the MacBook isn't a Thunderbolt port, or physically compatible with DisplayPort, Apple has a solution.

The $80 retail will allow for 4K display at 30Hz across HDMI. At this time, there is no 60Hz solution for the MacBook. Some users are reporting on the 2016 MacBook, so at this time going external with a wired connection may not be the best choice. Mac Pro Once again, Apple only lists official support for newer hardware in the Mac Pro line and for that, it is plug-and-play with Mini DisplayPort cabling.

However, given the PCI-e interface on the Mac Pro and sufficient OS support natively for the Mac Pro 3,1 and newer, 4K support is just a PC-compatible GPU away. Delving into the specs, it is important to look for HDMI 1.4 support in older cards for 4K support at 30Hz, and DisplayPort or Mini DisplayPort versions 1.3 or better.

According to Nvidia, the oldest card capable of 4K display is the Nvidia hosts a wide array of drivers for their cards across assorted versions of macOS and OS X, so the trick lies in picking a card as close to the reference design as possible, and installing the There is no need to buy a Mac-specific card.

However, the old card should be kept around for troubleshooting purposes, as a "generic" card won't display any video until the system has completely booted.

It is possible to get 4K support on the original 1,1, and 2,1 Mac Pro towers, but getting the prerequisite OS X 10.9 or newer on the machines is a . It might be time to think about newer hardware in this case, considering the core hardware is nearly a decade old. iMac, and Mac mini Apple has official support for 4K displays in the 27-inch late 2013 model, and the late 2014 Mac mini. Try as we might, there are no reliable ways to get 4K on older models of either.

The best way to connect is through a Mini DisplayPort connection, or Mini DisplayPort to DisplayPort cable, allowing for 4K video at 60Hz. Depending on the monitor, enabling MST may still be necessary.

Thunderbolt and external solutions Possibly coming soon is wider support for external graphical processing units (eGPU) connected through Thunderbolt. While there are options that function, they are barely more than hacks at this point, and expensive ones at that, above and beyond the PCI-e card necessary. AppleInsider has no recommendations for users regarding this —yet. Tweaking, for the advanced user A utility called SwitchResX has existed for some time, allowing Mac users to force the computer to output video to an external monitor beyond what Apple has restricted users.

The utility is not without peril —it is possible to damage hardware with it. The developer does an excellent job of cautioning users about potentially damaging settings, so if something malfunctions as a result of the software, the fault is entirely on the user. Also, unusual refresh rates can sometimes cause problems for sufferers of epilepsy or migraine headaches, so caution is advised. Using the utility, it's possible to do things like boost refresh rates on older 13-inch MacBook Pros, use higher resolutions and refresh rates when utilizing A/V receivers with HDMI, and the like.

, and costs 14€ to register. Echoes of the past 4K is the future. Apple has made it very easy to get a 4K video signal on the new MacBook Pro with Thunderbolt 3, and Thunderbolt 3 will expand to other Macs in the not too distant future. However, that doesn't mean you can't get ready now with your older gear.

There's no reason to wait if you need the technology, if you've bought a Mac in the last few years.


best way to connect macbook pro to 4k monitor

best way to connect macbook pro to 4k monitor - The Best Monitor for the MacBook Pro


best way to connect macbook pro to 4k monitor

You can use 4K displays and Ultra HD TVs with these Mac computers: • iMac (27-inch, Late 2014) and later • iMac Pro (2017)* • Mac mini (Late 2014) and later* • Mac Pro (Late 2013)* • MacBook (Retina, 12-inch, Early 2015) and later • MacBook Air (Early 2015) and later • MacBook Pro (Retina, Late 2013) and later * You can learn more about connecting multiple displays to your , , or .

Mac computers with built-in HDMI ports Any Mac with a built-in HDMI port can support 4K displays and Ultra HD TVs via HDMI at 3840 x 2160 at 30Hz, or 4096 x 2160 at 24Hz. Note that mirroring isn't supported at 4096 x 2160 at 24Hz. Additionally, the built-in HDMI port on Mac mini (2018) supports resolutions up to 4096 x 2160 at 60Hz. Mac computers compatible with HDMI via adapter The following Mac models support resolutions and refresh rates of up to 1080p at 60Hz, and 3840 x 2160 at 30Hz, over HDMI 1.4b when using the with macOS Sierra 10.12 or later: • iMac (2017 and later) • iMac Pro (2017) • MacBook (2015 and later) • MacBook Air (Retina, 13-inch, 2018) • MacBook Pro (2016 and later) The computers listed above also support 60Hz refresh rate over HDMI when used with a supported HDMI 2.0 display, HDMI Premium Certified cable, and a compatible third-party USB-C to HDMI 2.0 adapter.

If the HDMI display that's connected to your Mac starts up to the Apple logo but then goes dark, you might need to update your HDMI cable. To ensure compatibility, and to achieve 4K resolution, Apple recommends a cable that supports HDMI 2.0 or later, such as the .

Most SST 4K displays are supported at 30Hz. With OS X Yosemite 10.10.3 and later, most SST 4K (3840 x 2160) displays are supported at 60Hz on these Mac computers: • iMac (27-inch, Late 2014) and later • iMac Pro (2017) • Mac mini (2018) • Mac Pro (Late 2013) • MacBook Air (Early 2015) and later • MacBook Pro (Retina, 13-inch, Early 2015) and later • MacBook Pro (Retina, 15-inch, Mid 2014) and later With OS X Yosemite 10.10.3 and later, most SST 4K (4096 x 2160) displays are supported at 60Hz on these Mac computers: • iMac (Retina 5K, 27-inch, Late 2014) and later • iMac Pro (2017) • Mac Pro (Late 2013) • MacBook Pro (2016 and later) With macOS Sierra, MacBook (2015 and later) supports 4K (3840 x 2160) displays at 60Hz over DisplayPort.

These Mac computers support MST displays at 60Hz: • iMac (Retina 5K, 27-inch, Late 2014) and later • iMac Pro (2017) • Mac mini (2018) • Mac Pro (Late 2013) • MacBook Air (Retina, 13-inch, 2018) • MacBook Pro (Retina, 13-inch, Early 2015) and later • MacBook Pro (Retina, 15-inch, Late 2013) and later If you use a 60Hz MST display with the MacBook Pro (Retina, 15-inch, Mid 2015) with AMD Radeon R9 M370X graphics card or iMac (Retina 5K, 27-inch, Late 2014), only one additional Thunderbolt display is supported. .

Your Mac automatically detects MST-enabled displays. However, your display might require a firmware update to support 60Hz operation. Contact the maker of your display for details. You need to manually configure 4K displays to use MST.

Follow these steps to use the display's built-in controls to enable this feature: • Sharp PN-K321: Choose Menu > Setup > DisplayPort STREAM > MST > SET • ASUS PQ321Q: Choose OSD menu > Setup > DisplayPort Stream • Dell UP2414Q and UP3214Q: Choose Menu > Display Setting > DisplayPort 1.2 > Enable • Panasonic TC-L65WT600: Choose Menu > Display Port Settings > Stream Setting > Auto • Other DisplayPort displays: check with the display manufacturer for compatibility information.

Some displays with resolutions higher than 4K require two DisplayPort cables to connect the display at full resolution: • The Dell UP2715K 27-inch 5K display is supported by iMac (Retina 5K, 27-inch, Late 2014) and later and Mac Pro (Late 2013) running OS X Yosemite 10.10.3 and later. • The HP Z27q 5K display is supported by iMac (Retina 5K, 27-inch, Late 2014) and later and Mac Pro (Late 2013) running macOS Sierra.

The is supported on these Mac computers with DisplayPort Alt-Mode over USB-C: • iMac (21.5-inch, 2017) • iMac (Retina 4K, 21.5-inch, 2017) • iMac (Retina 5K, 27-inch, 2017) • iMac Pro (2017) • Mac mini (2018) • MacBook (2015 and later) • MacBook Air (Retina, 13-inch, 2018) • MacBook Pro (2016 and later) The is supported on these Mac computers with Thunderbolt 3 (USB-C): • iMac (21.5-inch, 2017) • iMac (Retina 4K, 21.5-inch, 2017) • iMac (Retina 5K, 27-inch, 2017) • iMac Pro (2017) • Mac mini (2018) • MacBook Air (Retina, 13-inch, 2018) • MacBook Pro (2016 and later) Choose Apple () menu > System Preferences, then click Displays to adjust or scale the resolution on your display.

This can make text and objects appear larger or give you more space on your screen. If your Mac doesn’t recognize a display you’ve just connected, hold down the Option key to make the Detect Displays button appear, then click that button. • 4K displays and Ultra HD TVs using Windows 7, 8, and 8.1 with Boot Camp use the same rules as macOS. If you upgrade from Windows 8 to 8.1, you should .

• To get the best graphics performance from your 4K display, connect the display or its adapter directly to your Mac, instead of connecting through another peripheral or device. Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement.

Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability.

Risks are inherent in the use of the Internet. for additional information. Other company and product names may be trademarks of their respective owners.


best way to connect macbook pro to 4k monitor

There are three different MacBook Pro 2017 models. MacBook Pro (13-inch, 2017, Two Thunderbolt 3 Ports) natively supports 1 display at 5120 x 2880 or 2 displays at 4096 x 2304. MacBook Pro (13-inch, 2017, Four Thunderbolt 3 Ports) also natively supports 1 display at 5120 x 2880 or 2 displays at 4096 x 2304.

MacBook Pro (15-inch, 2017) natively supports 2 displays at 5120 x 2880 or 4 displays at 4096 x 2304. So, the answer to your question is that you don’t have to do anything out of the ordinary to support two 4K monitors—all three models of MacBook Pro 2017 support at least that. And with the 15″ model you can even support two 5K displays if you wish.

Just connect the monitors to the laptop and you’re good.


Ultimate MacBook 4K USB-C Monitor? LG 27UD88 Unboxing & Review
Best way to connect macbook pro to 4k monitor Rating: 9,6/10 1633 reviews
Categories: best